GPP10A, gpp10b, gpp10d, gpp1 0g, gpp10j, gpp10k, gpp10m www.vishay.com vishay general semiconductor revision: 13-aug-13 1 document number: 88641 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated junction plastic rectifier features ? glass passivated chip junction ? low forward voltage drop ? low leakage current, typical i r less than 0.1 a ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in general purpose rect ification of power supplies, inverters, converters and freewheeling diodes application. mechanical data case: do-204al, molded epoxy over passivated chip ? molding compound meets ul 94 v-0 flammabi lity rating ? base p/n-e3 - rohs-co mpliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 50 v, 100 v, 200 v, 400 v, 600 v, 800 v, 1000 v i fsm 30 a i r 5.0 a v f at i f = 1.0 a 1.1 v t j max. 150 c package do-204al (do-41) diode variations single die do-204al (do-41) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol GPP10A gpp10b gpp10d gpp10g gpp10j gpp10k gpp10m unit maximum repe titive peak ? reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current 0.375" (9.5 mm) lead length ? at t a = 75 c i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a maximum full load reverse current, ? full cycle average 0.375" (9.5 mm) lead length t a = 75 c i r(av) 30 a operating junction and storage temperature range t j , t stg - 55 to + 150 c
GPP10A, gpp10b, gpp10d, gpp1 0g, gpp10j, gpp10k, gpp10m www.vishay.com vishay general semiconductor revision: 13-aug-13 2 document number: 88641 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, pcb mounted ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - typical instantaneous forward characteristics per diode electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol GPP10A g pp10b gpp10d gpp10g gpp10j gpp10k gpp10m unit maximum instantaneous forward voltage 1.0 a v f 1.1 v maximum dc reverse current ? at rated dc blocking voltage t a = 25 c i r 5.0 a t a = 100 c 50 maximum junction capacitance 4.0 v, 1 mhz c j 6pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol GPP10A gpp10b gpp10d gpp10g gpp10j gpp10k gpp10m unit typical thermal resistance r ? ja (1) 50 c/w r ? jl (1) 25 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode gpp10j-e3/54 0.34 54 5500 13" di ameter paper tape and reel gpp10j-e3/73 0.34 73 3000 ammo pack packaging average forward current (a) ambient temperature (c) 1.2 1.4 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 175 150 0.01 1 10 100 0.4 0.8 1.2 1.6 2.0 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) 0.6 1.0 1.4 1.8 0.1
GPP10A, gpp10b, gpp10d, gpp1 0g, gpp10j, gpp10k, gpp10m www.vishay.com vishay general semiconductor revision: 13-aug-13 3 document number: 88641 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical reverse characteristics fig. 4 - typical junction capacitance package outline dimensions in inches (millimeters) 0.01 0.1 1 10 020406080100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e current (a) t a = 125 c t a = 25 c 1 10 100 0.1 1 10 100 rever s e voltage (v) junction capacitanc e (pf) do-204al (do-41) 0.107 (2.7) 0.080 (2.0) dia. 0.034 (0.86) 0.028 (0.71) dia. 1.0 (25.4) min. 1.0 (25.4) min. 0.205 (5.2) 0.160 (4.1)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
